|
 |
|
|
| |
| Requirements to Suppliers of the Ryazan Machine Tool Works |
| Requirements |
Direct contracts with the Supplier are preferable |
| Quality standards |
Meeting the requirements of GOST, specifications, quality certificates |
| Organization standards |
Keeping to the schedule of delivery
Recovery of losses due to wastage in determined time
Geographic location of the Supplier
|
| Loyalty |
Inclusion of Customer's requirements to the Contract
Efficiency of the Supplier in cases of reclamation
Optimum prices
Possibility of deferral payments
|
| Accessories of international makers |
| for each group it's possible to substitute for accessories of other makers, keeping functionality, quality and not putting in cost increasing |
| |
Name of material |
Annual demand, RUR
|
| 1 |
Lathe chucks --->> |
15 000 000,00 RUR |
| 2 |
Hydraulic equipment (up to 32 MPa) --->> |
7 000 000,00 RUR |
| 3 |
Quick-changing tool heads with blocks, Height of cutter=25..32mm --->> |
5 000 000,00 RUR |
| 4 |
Transporters, apron conveyors, screw conveyers chip removal. Width of reception tray 280…435mm --->> |
4 000 000,00 RUR |
| 5 |
Hardalloyed cutting tool for machine-tools --->> |
4 000 000,00 RUR |
| 6 |
Automatic turret heads --->> |
3 500 000,00 RUR |
| 7 |
Low-voltage equipment 1,5..150À --->> |
3 300 000,00 RUR |
| 8 |
Cable lugs for wires diam. 0,75..35mm --->> |
2 500 000,00 RUR |
| 9 |
Linear roll guides --->> |
2 300 000,00 RUR |
| 10 |
Buttons, switches, joy-sticks, signal equipment --->> |
2 000 000,00 RUR |
| 11 |
Devices for intermittent lubricating --->> |
1 700 000,00 RUR |
| 12 |
1,2,3-axis digtal readout devices with positioning length up to 16m --->> |
1 500 000,00 RUR |
| 13 |
Microswitches units, travel end switches --->> |
1 500 000,00 RUR |
| 14 |
Protective sheathes for power wires and cables --->> |
1 200 000,00 RUR |
| 15 |
Conduit circuits and ducts --->> |
1 000 000,00 RUR |
| 16 |
Halogen luminaires for metal-cutting machines --->> |
1 000 000,00 RUR |
| 17 |
Programmed controller (inputs/outputs – 64/48) --->> |
1 000 000,00 RUR |
| 18 |
Terminal-block sets --->> |
900 000,00 RUR |
| 19 |
Wires and cables marking --->> |
900 000,00 RUR |
| 20 |
Mounting perforated ducts, height 75mm, width 50..100mm --->> |
800 000,00 RUR |
| 21 |
Pump stations for filter units, productivity 50-1000 litr./min --->> |
700 000,00 RUR |
| 22 |
Cables --->> |
700 000,00 RUR |
| 23 |
Two speed reducers (I=1 and I=4, N=30 KW) --->> |
650 000,00 RUR |
| 24 |
Drills, boring crowns for deep-hole drilling machines Diam.30-300ìì --->> |
640 000,00 RUR |
| 25 |
Honing heads for machining holes Diam.30-180mm --->> |
600 000,00 RUR |
| 26 |
Protective units for guide-ways: shields, wipers, telescopic covers. --->> |
600 000,00 RUR |
| 27 |
Pilot relay 24VDC --->> |
500 000,00 RUR |
| 28 |
Rotary hydro- and pneumocylinders --->> |
450 000,00 RUR |
| 29 |
Couplings --->> |
350 000,00 RUR |
| 30 |
Equipment for metal-cutting machine-tools --->> |
250 000,00 RUR |
| 31 |
Glues, pressurizers, thread seals --->> |
150 000,00 RUR |
|
|
|
|
 |
|
“Russian National Olympus”
award |
|
